Ford Power - Schaltet das erste?
Guten Abend.
Ich mache eine Frage an Besitzer von MK3.
Ihr Auto mit dem Ford Power ausgestattet ist, bindet an erster an kalten Morgen auf?
Ich erwarte eine Antwort, Grüße an alle
Beste Antwort im Thema
Darum ob das Auto bindet an erster an kalten Morgen auf natürlich, das steht doch da 😛
19 Antworten
Good night,
I am not german, I am from Portugal, and my german is very poor, so I tried do did a translation.
So, I have a Ford Focus, with a 1.6 liters diesel engine and 115 hp.
My question is: your MK3, with Ford Power Button, in cold morning, start at first attempt? When is cold, I press once - doesnt start; I press twice - sometimes starts, other times only at third attempt. It's normal?
Thanks
Good evening dmsl,
please notice, that a diesel engine needs to preheat. Does the Led that indicates the preheating (yellow helix) light up?
Try just to wait a bit after pressing the power button once and wait if the engine starts a bit later by itself. If not, something is wrong with your engine or your starter or your battery is low. In that case you should contact your local Ford dealer.
Greetings
Google Translation into portoguese 😛
Boa noite dmsl,
por favor, note que um motor a diesel precisa de pré-aquecimento. Será que o Led que indica a luz (hélice amarelo) pré-aquecimento para cima?
Tente apenas que esperar um pouco depois de pressionar o botão de energia e esperar se o motor começa um pouco mais tarde por si só. Se não, algo está errado com seu motor ou o seu arranque ou a bateria está fraca. Nesse caso, você deve contactar o seu concessionário Ford local.
Saudações
Good night,
Thanks for your reponse.
The light that indicates the preheating is where? You said that is a yellow led, but where I can find it?
Thanks for all (until now 😉
PS: The google translation isnt very bad eheh
Good Morning
The Led that indicates preheating is in the left lower corner of the RPM gauge.
You can see it if you enter service mode (press and hold the left ok button, then press Power and keep ok pressed until TEST shows up) and press the left down 2 times, then all Led's are lighting up.
bom dia
O LED que indica o pré-aquecimento está no canto inferior esquerdo do medidor de RPM.
Você pode vê-lo, se você entrar no modo de serviço (pressione e segure o botão esquerdo ok, em seguida, pressione Power e mantenha pressionado até ok teste mostra-se) e pressione a esquerda para baixo duas vezes, então tudo de Led estão acendendo.
Ähnliche Themen
Good night,
Thanks for your response.
I have to wait to a cold morning and see if the light appears.
Thanks for all