ACC module asking SVM code (Retrofit)
Hi
I have retroffited na acc module in my a3 8v 2016
The problem is i can’t activate it since dealer ask for a svm code.
I don’t have any cloue how to get that code, they have removed the componente protection but ask for svm code to activate it.
In vcds i have this
10 Faults Found:
1807 - No Enable Indentifications Active (Activation needed)
B2032 00 [009] - -
[New feature! Extended UDS Fault Status: 00000001.
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 2018.03.27
Time: 16:56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
0288 - Databus
U1121 00 [009] - Missing Message
[New feature! Interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 2018.03.27
Time: 16: Extended UDS faulted is currently supported by current. 56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
0310 - Databus
U1121 00 [009] - Missing Message
[New feature! Interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 2018.03.27
Time: 16: Extended UDS faulted is currently supported by current. 56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
0287 - Databus
U1121 00 [009] - Missing Message
[New feature! Extended UDS fault detail is only supported by current gen interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time: 16 : 56: 15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1804 - Internal Fault
B200F F0 [009] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time: 16: 56: 15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1803 - Internal Fault
B200F F0 [009] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time : 16:56:15
Control Module temperature: 31 ° C
Voltage terminal 15:12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1802 - Internal Fault
B200F F0 [009] Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time : 16:56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1801 - Internal Fault
B200F F0 [009] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time: 16: 56: 15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1800 - Internal Fault
B200F F0 [009] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 27/03/2018
Time: 16: 56: 15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
1792 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
C1103 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gene interfaces].
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 92
Mileage: 47602 km
Date: 03/27/2018
Time: 16:56:15
Control Module temperature: 31 ° C
Voltage terminal 15: 12.3 V
Vehicle speed: 0.00 m / s
Acceleration: 0.00 m / s²
Any help?
Thanks
Beste Antwort im Thema
https://www.facebook.com/mqbretrofit/
They can do FEC in gateway.
01 – Engine
– for manual gearbox you need to tick ACC – PR-8T5
– for DSG gearbox you need to set ACC with Front Assist (PR-8T3, PR-8T8)
03 – ABS (coding for 29 bit) you ned to edit bit 24:
– for manual gearbox you need set: 14 (or 16)
– for manual gearbox and Lane Assist you need to set F4
– for DSG gearbox you need to set F8
09 – Gateway
– Add 13 – Auto Dist. Reg on the installation list
– Under Adaptation change steering wheel type to ACC
17 – Instrument
– On the cluster set all the ticks for Front Assist and Distance Regulation
5F – Radio
– Set all the ticks for Front Assist, ACC and PreCrash
A5 – Front Camera
– Set presence of ACC
The last module that need to be coded is the Radar itself. Here is my coding for the unit:
Address 13: Auto Dist. Reg (J428) Labels:| 5Q0-907-567.clb
Part No SW: 5Q0 907 567 P HW: 5Q0 907 567 P
Component: ACC3 H10 0100
Coding: 00000100FE030B
26 Antworten
You have to code ABS to, at least if you canged the rear ABS-Sensors.
Www.Cartronic.nl kann das.
Hello, yes, CP was removed, all is officialy by dealer.
Switch is added
ABS sensors are swapped.
I activated Cruise control by dealer.
All is coded.
ABS is good for ACC
Gateway is High
Engine and Automatic transmission is also ok.
Now it seems all function is making with dealer enablement in gateway (?)
Do someone know (not expensive) solution? It should be fine to public it and f*ck VW/Audi. Car is my without warranty and I can do with it what i want :-(
Zitat:
1807 - No Enable Indentifications Active
B2032 00 [009] - -
[FAULT_SWAP_NO_FSID_ACTIVE]
It is not possible to resolve this. Period.
Your car / Your VIN is not enabled for ACC because it did not have it by factory.
You only can retrofit the old ACC sensor because they were not protected by SWAP.
Ähnliche Themen
Hello
Thank you
And what pn code of radar i have to use?
Thank you
Possible: MRR(160 km/h) und LRR(210 km/h)
You seem to have a MRR14evo --> not possible to activate
I do not have Part Numbers, sorry.
5Q0 907 541
Thank you
Radar is on the way!
I let here know how i finished it!
I also have a problem with the acc retrofit. I have changed the rear sensors, these now indicate the wrong direction of rotation. What can this be?
you have to change the coding in your abs. But please don't ask me wich byte and bit this!?
It seems I have to change byte 24 and byte 26
Byte 24 is 14
Byte 26 is 50
Is this right?
https://www.facebook.com/mqbretrofit/
They can do FEC in gateway.
01 – Engine
– for manual gearbox you need to tick ACC – PR-8T5
– for DSG gearbox you need to set ACC with Front Assist (PR-8T3, PR-8T8)
03 – ABS (coding for 29 bit) you ned to edit bit 24:
– for manual gearbox you need set: 14 (or 16)
– for manual gearbox and Lane Assist you need to set F4
– for DSG gearbox you need to set F8
09 – Gateway
– Add 13 – Auto Dist. Reg on the installation list
– Under Adaptation change steering wheel type to ACC
17 – Instrument
– On the cluster set all the ticks for Front Assist and Distance Regulation
5F – Radio
– Set all the ticks for Front Assist, ACC and PreCrash
A5 – Front Camera
– Set presence of ACC
The last module that need to be coded is the Radar itself. Here is my coding for the unit:
Address 13: Auto Dist. Reg (J428) Labels:| 5Q0-907-567.clb
Part No SW: 5Q0 907 567 P HW: 5Q0 907 567 P
Component: ACC3 H10 0100
Coding: 00000100FE030B