Retrofit Lane Assist Camera A5 3Q0980654H

Skoda Karoq NU

Hello all !

I retrofitted a Lane Assist Camera recently
when i made the calibration of the camera with odis i went to the VCDS cable and made the adaptations
for the 3 modules 5F,A5,44

i instantly
enabled successful the high beam assist,
the Traffic sign recognition ,

BUT the lane assist dont want to work. this is what i get

<iframe class="video youtube-player" width="425" height="355" type="text/html" src="https://www.youtube.com/embed/CiljeRVwpnI" allowfullscreen="1" frameborder="0"></iframe>

i s?earched on internet and i found similar problems and the solution was behind module 44 ?????(i think)

this is the camera A5 inside the VCDS , this is the error ...??
attached in photo

and my module 44 codind is
Address 44: Steering Assist (J500) Labels:* None
Part No SW: 5Q0 910 143 B HW: 5Q0 910 143
Component: MQB_VWBS_GEN2 212 2201
Coding: 0100001000500010

------------------------------
Hallo alle !
 

Ich habe kürzlich eine Lane Assist Camera nachgerüstet
als ich die kalibrierung der kamera mit odis durchführte, ging ich zum vcds kabel und nahm die anpassungen vor
für die 3 Module 5F, A5,44
 
Ich sofort
aktiviert erfolgreich das Fernlicht assistieren,
die Verkehrszeichenerkennung,

ABER der Spurhalteassistent will nicht arbeiten. das ist was ich bekomme
<iframe class="video youtube-player" width="425" height="355" type="text/html" src="https://www.youtube.com/embed/CiljeRVwpnI" allowfullscreen="1" frameborder="0"></iframe>

Ich suchte im Internet und fand ähnliche Probleme und die Lösung war hinter Modul 44 (ich denke)
das ist die Kamera A5 im VCDS, das ist der Fehler ... ??
im Foto beigefügt
und mein modul 44 ist codind
Address 44: Steering Assist (J500) Labels:* None

Part No SW: 5Q0 910 143 B HW: 5Q0 910 143

Component: MQB_VWBS_GEN2 212 2201

Coding: 0100001000500010

20 Antworten

I really want to help but I hate helping people with fake equipment.

If it is really your mechanic that owns the hardware, then it is very likely that no original interface was used.
Coding errors and problems with control unit can come from faulty china interfaces that claim to be OK...

It is not my intention to waste my time with bullying you for no reason.

But there is something wrong with your mechanic's equipment and I do not support using clone products.

I understand, I m gonna buy my own equipment. any good source for original Ross in Europe?

https://www.ross-tech.com/distributors.php

This is the official distributor list

I think I found my problem thought I got a verification from an retrofiter,
In MBQ platforms the lane assist camera cable Hcan and L can for the ACC have to be connected also "tapped" into the ACC lines
And this was the only cable I didn't physically connect.
I have to remove the front bumper to get access I think and after find the 2 can lines

Ähnliche Themen

But I read that also drivers footwell plugs have the ACC low and High can lines
Pin 1 of the camera goes to pin 11 L brown plug
Pin 7 of the camera goes to pin 9 H brown plug

OK i verify 100% that the front radar is there
and also at last
for the lane assist the secret was in module 13!! and ofcourse for cars without lane assist camera at all module 13 byte 3 bit 6 HAVE to be activated. i leave that here for help !!!

Deine Antwort
Ähnliche Themen